If the electric is working just fine in the home and you are not having major issues, you might leave your electric wiring alone, but I do not counsel it. The old knob and tube electric wiring that runs thru the walls isn’t exposed but this kind of wiring in your attic is exposed and this is going to be perilous for anyone that makes a decision to walk around in your attic.

Here is an example of what I am talking about or a situation that would become difficult and if you are not going to redo your electrical system, it would not be a terrible idea to avoid walking around these exposed wires in your attic. Let’s assume that you or one of the members of your family makes a decision to store some things in the attic and you see these wires, but as have no idea what they are. The majority that are not acquainted with construction or electric wiring, or maybe old electric wiring, are not going to have a concept, what these wires are. Once they start shoving Xmas boxes into their attic and pushing them against the electric wires, you might end up with fire jeopardy and this isn’t good.

It would not be a very bad idea to familiarize your folks with these electric wires.

Get a ladder to provide access for you and your folks and a flashlight and take each relation up the ladder individually and explain that these wires carry electricity and could injure them. Old knob and tube electric wiring is very perilous and eventualities that create safety risks like these should be explained to the members of your family. Always think safety, particularly when working around electricity.

This is one part of the construction phase that needs to be done by a certified pro. You should not try to install anything connected with the electricity if you don’t have the correct coaching. Some of the fundamental principles of electric work are:

* Never start working with electricity till the power supply to the home has been shut off.
* Wires of a similar color connect to one another.
* When installing receptacle boxes, you push the bare end of the wire into spring grip holes. The boxes have labels to tell you what color wires go into each hole.
* The black wires in the wires are used for connecting switches.
* The wiring employed in houses is Number twelve or fourteen gauge wiring.
* For any extended wiring circuit, always use the same size wire for the continuation.

When you’re connected new wiring to the current wiring in the home, you should generally do so in the last outlet on the run of wire. You’ll be able to find the last outlet by removing the plate to discover how many wires are connected in the outlet.

The last one will have wires hooked up to only a couple of the terminal screws. The 2 remaining terminal screws will be the start line for the new writing. You do have to test to see which gauge wire was employed and you’ve got to keep going with this. Unless the junction box is full, you may attach new wiring to this box. Trace the wire back to see what voltage is on it so you will not connect a 120- voltage to one which has 240- voltage. Find the white wires in the box and attach the new white wires at about that point.